I am using a module that has the thickness 1.9 inches.I don't know which midclamps and end clamps. Is there a table for that? Comments Waco, I'd suggest you look at this table: https://www.greentechrenewables.com/prosolar-clamps You need 2.75" mid clamp and 1.9" end clamp. The reason you'd use a larger mid clamp is the bolt that goes through the clamp+channel nut. Have a look at the attached drawings. File Attachment(s) View prosolar_mid clamp detail36.47 KB View prosolar_mid clamp detail225.04 KB Reply Add new comment Submitted 13 years 11 months ago Asked by Damian Waco Topics Products Racking And Mounting ShareTwitterFacebookLinked inMail Add new comment
Waco, I'd suggest you look at this table: https://www.greentechrenewables.com/prosolar-clamps You need 2.75" mid clamp and 1.9" end clamp. The reason you'd use a larger mid clamp is the bolt that goes through the clamp+channel nut. Have a look at the attached drawings. File Attachment(s) View prosolar_mid clamp detail36.47 KB View prosolar_mid clamp detail225.04 KB Reply
Comments
Waco, I'd suggest you look at this table: https://www.greentechrenewables.com/prosolar-clamps
You need 2.75" mid clamp and 1.9" end clamp.
The reason you'd use a larger mid clamp is the bolt that goes through the clamp+channel nut. Have a look at the attached drawings.