Description
Unirac Single Leg Kit
Minimize the vertical height of your array—to hide an array behind a parapet, for example. You can also optimize tilt angle on a pitched roof to maximize system performance. Tilt angle depends on leg length and the make and model of your PV modules. Use standard rail with all tilt legs.
andbull; In low profile arrays, tilt angles depend on leg length and module length. If ordering kits for use with SolarMount rail kits, no other items are required. If ordering for use with Pro-Pak rails, then L-feet must also be ordered.
andbull; Each leg contains a square tube, a strut insert, and fasteners.
andbull; Note that usable lengths are 2andquot; less than stated because holes are drilled 1andquot; from ends.
andbull; Low profile solutions require the addition of two (2) L-foot for each leg.
Old Unirac Part ID: 310108
48andquot; to 106andquot; (Rail length per row) -2 (Tilt legs required per row)
120andquot; to 180andquot; (Rail length per row) -3 (Tilt legs required per row)
192andquot; to 216andquot; (Rail length per row) -4 (Tilt legs required per row)
226andquot; to 288andquot; (Rail length per row) -5 (Tilt legs required per row)
300andquot; to 336andquot; (Rail length per row) -6 (Tilt legs required per row)
348andquot; to 408andquot; (Rail length per row) -7 (Tilt legs required per row)
420andquot; to 432andquot; (Rail length per row) -8 (Tilt legs required per row)